ABB AnalyzeIT AX460 Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} ABB AnalyzeIT AX460. ABB AnalyzeIT AX460 12 pagina's. Single and dual input analyzers, profibus datalink description

Pagina afdrukken

CONTENTS

INTRODUCTION .......................................................... 1

1.1

PROFIBUS ......................................................... 1

1.1.1

PROFIBUS-DP ...................................... 1

1.1.2

PROFIBUS-PA ...................................... 1

1.2

PROFIBUS and ABB Products ........................... 2

1.3

PROFIBUS DP Transmission Technology ........... 2

1.4

ABB Industrial IT ................................................. 2

INSTALLATION ............................................................. 3

2.1

Installation Overview ........................................... 3

2.2

Cable Length ...................................................... 3

2.3

Cable Specification ............................................ 3

2.4

Device Integration - the GSD File ....................... 3

NETWORK CONNECTION AND CONFIGURATION ... 4

3.1

Network Connections ......................................... 4

3.2

Network Configuration ....................................... 5

APPENDIX A - GSD FILE MODULES .................................. 6

A1.1

Module 01 .......................................................... 6

A1.2

Module 02 .......................................................... 6

A1.3

Module 03 .......................................................... 6

A1.4

Measured Process Variable ................................ 6

A1.5

Sensor Status Message ..................................... 7

A1.6

Alarm Status ....................................................... 7

1 INTRODUCTION

Note. This Supplementary User Guide contains

information specific to PROFIBUS

Series analyzers and must be read in conjunction with

the appropriate User Guide for the product.

1.1 PROFIBUS

PROFIBUS is a manufacturer-independent, open fieldbus

standard for a wide range of applications in manufacturing,

process and building automation. Manufacturer independence

and openness are ensured by the international standard

EN 50170.

Using the PROFIBUS protocol, devices from different

manufacturers

exchange

communications bus without the need for special interface

equipment.

The PROFIBUS family comprises three types of protocol,

PROFIBUS-DP, PROFIBUS-FMS and PROFIBUS-PA, each of

which is used for different tasks. Of these three protocols, the

most important for process automation are PROFIBUS-DP and

PROFIBUS-PA.

Further

information

www.profibus.com.

1.1.1 PROFIBUS-DP

PROFIBUS-DP is designed for high-speed data exchange and is

commonly used by complex or externally powered devices. The

central controller or 'master' device (e.g. PLC or PC) utilizes

PROFIBUS-DP as a fast serial connection with distributed (slave)

field devices such as PROFIBUS-enabled AX400 Series

analyzers.

The master reads the input information cyclically in a defined,

recurring order from the slave(s). When configuring the bus

system, the user assigns an address in the range 0 to 125 to

each slave device and also defines which of the slaves are to be

included in, or excluded from, the data acquisition cycle.

1.1.2 PROFIBUS-PA

PROFIBUS-PA

designed

automation field devices that require power via the network with

the option to use intrinsic safety for hazardous areas. Typical

devices using this protocol include transmitters and positioners.

A DP/PA coupler or link device is used to connect the

PROFIBUS PA network to the PROFIBUS DP network.

-DP-enabled AX400

information

the

PROFIBUS

can

found

accommodate

process

same