Creone KeEYBOX KEYRACK KEYWIN5 Installatiehandleiding - Pagina 16
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Creone KeEYBOX KEYRACK KEYWIN5. Creone KeEYBOX KEYRACK KEYWIN5 19 pagina's.
Pagina afdrukken
Connecting KeyBox 9500EC
The instructions below are for when you connect KeyBox 9500EC to
an existing KeyBox 9400/9500SC. Follow the instructions carefully:
STEP 1
Mount the KeyBox 9500EC on the wall according according the
measurement information on page 8.
STEP 2
Disconnect the mains power to the cabinet.
STEP 3
Connect the strip cables as shown in page 15.
STEP 4
Connect the solenoid cable and alarm cable according to
picture below.
KeyWin 5 manual, Version 1.0.0. All and copyright reserved by Creone AB
STEP 5
Turn on the power to the main cabinet. When the cabinet has started
up, enter the service PIN (default 1234#) and access the configura-
tion menu, see page 10 in these instructions.
STEP 6
Go to "Set number of doors" and enter the correct number of doors,
and the correct number of strips in each door.
STEP 7
Go to "Reboot" and confirm. When the cabinet has started up, the
expansion cabinet is ready to use.
Alarm contact
Solenoid cable
Solenoid cable
Alarm contact
16