Creone KeEYBOX KEYRACK KEYWIN5 Installatiehandleiding - Pagina 9
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Creone KeEYBOX KEYRACK KEYWIN5. Creone KeEYBOX KEYRACK KEYWIN5 19 pagina's.
Pagina afdrukken
3.
Connect the power cable to the power supply
5.
Connect the battery backup cable to the PCB according to
the diagram on the right. The cabinet will now start up and
you will see <Rebooting> in the display. When the display
shows <Keybox5>, the physical installation of the cabinet is
complete.
Quick guide - Configure your cabinet
1.
Enter 1234# on the keypad to access the configuration menu. You
can find a complete description of this menu on the next page.
2.
Enter the number of doors and strips the system includes.
3.
Enter time/date.
4.
If you will be using a fixed IP, turn the DHCP to off and go to the
next step (otherwise go to step 6)
5.
Enter IP number/Netmask Gateway.
6.
Choose Reboot at the bottom of the menu and confirm.
7.
The cabinet will now reboot and when this has taken place confi-
guration is complete.
KeyWin 5 manual, Version 1.0.0. All and copyright reserved by Creone AB
4.
Connect the TCP/IP cable according the diagram on the below.
9