Digilent chipKIT DP32 Referentiehandleiding - Pagina 7
Blader online of download pdf Referentiehandleiding voor {categorie_naam} Digilent chipKIT DP32. Digilent chipKIT DP32 10 pagina's. Board
Ook voor Digilent chipKIT DP32: Referentiehandleiding (18 pagina's)
Pagina afdrukken
chipKIT™ DP32™ Board Reference Manual
PPS Assigned Peripherals:
Output Compare: Pin 8 (OC1), Pin 2 (OC2), Pin 3 (OC3), Pin 13 (OC4), Pin 6 (OC5). Output compare allows
for the implementation of PWM signals.
Input Capture: Pin 6 (IC1), Pin 11 (IC2), Pin 2 (IC3), Pin 14 (IC4), Pin 13 (IC5). Input capture allows for the
synchronization of timers with captured signals, along with the execution of interrupts.
External Timer Input: Pin 18 (TCK1), Pin 14 (TCK2), Pin 12 (TCK3), Pin 6 (TCK4), Pin 3 (TCK5) allows for
timers to be clocked from external sources.
External Interrupt: Pin 3 (INT1), Pin 13 (INT2), Pin 2 (INT3), Pin 17 (INT4). Allows for external interrupts to
be triggered in their own ISRs. Interrupts may be edge triggered or level triggered, though only one of
rising, falling, high, or low, may be chosen for trigger sensitivity.
Change Notice Pins: All change notice pins are matched with their chipKIT pin numbers (e.g. CN0 is
associated with Pin 0). There is a change notice pin for each I/O pin.
UART: Pin 14 (U1TX), Pin 6 (U1RX), Pin 7 (U2TX), and Pin 10 (U2RX) are used to implement UART
peripheral controls. Unlike other chipKIT boards, the USB Serial communication is not implemented using
a UART controller.
SPI: Synchronous serial port. Pin 9 (SS), Pin 18 (MOSI), Pin 7 (SCK), Pin 10 (MISO). This uses SPI1 on the
PIC32 Microcontroller. The second SPI is implemented as Pin 14 (SS), Pin 2 (MOSI), Pin 13 (MISO), and Pin
8 (SCK).
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 7 of 9