Cres Cor CSH12210 Series Gebruiks- en onderhoudsinstructies
Blader online of download pdf Gebruiks- en onderhoudsinstructies voor {categorie_naam} Cres Cor CSH12210 Series. Cres Cor CSH12210 Series 2 pagina's. Carving station
Pagina afdrukken5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
Model: CSH12210 Series, 120 and 240 Volt
ELECTRICAL SPECIFICATIONS:
Model No.
CSH12210
CSH12210
THERMOSTAT KNOB
HOW TO OPERATE UNIT:
1. Plug cord into proper wall outlet.
2. Push thermostat switch "ON" and turn thermostat
to no. 10.
3. Preheat for 30 minutes; then add cutting board
and/or pans to the heated base.
4. Push lamp switch(es) to "ON" for additional
heat.
NOTE: Proper food holding temperature is 140°F
(60°C) or higher.
For uncovered pans or product:
Leave thermostat on no. 10 setting.
For covered pans or product:
Turn the thermostat to no. 6 setting.
5. Push switches and turn thermostat "OFF" when
done.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Volts
Watts
120
1100
240
1150
OFF
0595-002
Amps
Hertz
9.2
60
4.8
60
THERMOSTAT BEZEL
0848-063
HEATERS "ON/OFF"
CLEANING INSTRUCTIONS:
1. Remove power cord from wall outlet.
2. DO NOT immerse unit in water.
3. DO NOT get water on controls.
4. Wipe cooled exterior with soap and water.
5. DO NOT use abrasives or harsh
chemicals.
REPLACEMENT PARTS:
Lamp, Red (250 Watts) ................................ 0820-001
Lamp, White (250 Watts) ............................. 0820-033
Lamp, Red (275 Watts/240 Volts) ................ 0820-014
Cutting Board ............................................... 1004-018
Legs - Adjustable ......................................... 1206-027
Socket ........................................................... 0822-037
Carving
Station
Page 1 of 2
Rev. 8 (8/23)
Phase
NEMA
1
5-15
1
6-15
HOOD "ON/OFF"
FL-2206
Service
15 AMP
15 AMP