Cres Cor H-339-X-C Series Gebruiks- en onderhoudsinstructies - Pagina 2
Blader online of download pdf Gebruiks- en onderhoudsinstructies voor {categorie_naam} Cres Cor H-339-X-C Series. Cres Cor H-339-X-C Series 4 pagina's. Insulated undercounter cabinets
Pagina afdrukkenInsulated
Holding Cabinet
Rev. 4 (5/14)
Page 2 of 4
WARNING
BEFORE
CLEANING CABINET:
1. Unplug power cord from wall.
2. Do NOT hose cabinet with water.
3. Do NOT get water on controls.
4. Do NOT use abrasives or harsh chemicals.
CABINET
Inside and
Outside
FINGERPRINTS,
(Aluminum)
HOW TO ADJUST THE DOOR LATCH:
1. For vertical adjustment
(Up and down movement):
a. Loosen (2) screws located in magnetic
strike on cabinet.
b. Move strike up or down for alignment to
magnet on latch.
c. Tighten screws to secure
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
FL-2300
MAINTENANCE INSTRUCTIONS
SOIL
Mild detergent* and hot water, or
DIRT
mild abrasive cleaner.
Steam (no strong alkaline additive) 1. Rinse after steam cleaning.
Detergent* and hot water
GREASE OIL
Chemical oven cleaner for
aluminum
Mild abrasive cleaner.
Oily or waxy cleaner.
WATER SPOTS
Mild abrasive cleaner.
*Mild detergents include soaps and non-abrasive cleaners.
5925 Heisley Road • Mentor, OH 44060-1833
Hints:
1. Wipe up spills as soon as possible.
2. Clean cabinet regularly to avoid heavy dirt build-up.
3. Make a test spot with cleaner.
4. Follow manufacturer's directions on cleaner.
5. Do not mix cleaners
6. Avoid drips and splashes.
CLEANER
2. For horizontal adjustment
(Greater or lesser magnetic draw):
a. Loosen four (4) screws in latch on door.
b. Move latch forward or backward to adjust
magnetic draw.
c. Tighten screws to secure.
METHOD
1. Use soft, damp cloth.
2. Rinse with hot water.
3. Wipe dry.
2. Wipe dry.
1. Wipe with soft, damp cloth.
2. Rinse with hot water.
3. Wipe dry.
Follow oven cleaner
manufacturer's directions.
Apply with soft, clean cloth.
Wipe with damp cloth.