Digilent chipKIT Basic I/O Shield Referentiehandleiding - Pagina 2
Blader online of download pdf Referentiehandleiding voor {categorie_naam} Digilent chipKIT Basic I/O Shield. Digilent chipKIT Basic I/O Shield 14 pagina's.
Pagina afdrukkenchipKIT™ Basic I/O Shield™ Reference Manual
1
Hardware Overview
The Basic I/O Shield has the following hardware features:
1. Pushbuttons
Four pushbuttons provide discrete momentary-contact digital inputs. These can be accessed using
the digitalRead function.
2. Slide Switches
Four slide switches provide discrete digital inputs. These can be accessed using the digitalRead
function.
3. J2: Shield Power Connector
This connector receives power from the chipKIT microcontroller board.
4. J3: Analog Signal Connector
Pin 1 (analog signal A0) is connected to a potentiometer. Pins 5 and 6 (labeled A4 and A5) provide
access to the I
sensor and the EEPROM and for the I
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
2
C signals SDA and SCL for the I
2
C daisy chain connector.
2
2
C bus. The I
C bus is used to access the temperature
Page 2 of 13