Cres Cor H137UA12CCAN Gebruiks- en onderhoudsinstructies - Pagina 3
Blader online of download pdf Gebruiks- en onderhoudsinstructies voor {categorie_naam} Cres Cor H137UA12CCAN. Cres Cor H137UA12CCAN 5 pagina's. Hot cabinets (aluminum / stainless)
Pagina afdrukken
5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137UA...C & H13818...C Series Hot Cabinets (Aluminum)
H137SUA...C & H138S18...C Series Hot Cabinets (Stainless)
WARNING
BEFORE CLEANING CABINET:
1. Allow the cabinet to cool.
2. Do NOT use abrasives or harsh chemicals.
Is your cabinet aluminum or stainless steel
construction? Be sure your cleaner is suitable
for that material.
Note: Stainless Steel cabinets have an "S" in their
model numbers.
HOW TO CLEAN THE UNIT:
Soil
Dirt
Fingerprints, grease, oil
Water Spots
Note: Gaskets are removable for cleaning.
TROUBLE-SHOOTING CHART:
FAILURE:
1. Yellow light at switch does NOT light.
2. Unit does not heat.
3. Unit gets too hot or won't shut off.
4. Blower does not work or makes noise.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Cleaner
Mild Detergent* and hot water, or
mild abrasive cleaner.
Steam (no strong alkaline additive)
Mild abrasive cleaner.
Oily or waxy cleaner.
Chemical oven cleaner.
Mild abrasive cleaner.
*Mild detergent includes soaps and non-abrasive cleaners.
POSSIBLE CAUSE:
1a. Circuit breaker/fuse to wall outlet is blown
1b. Cord is unplugged from wall outlet.
1c. Switch is "OFF."
2a. Thermostat set too low or is "OFF."
2b. Switch is "OFF."
3a. Defective electrical parts.
UNPLUG UNIT FROM WALL OUTLET
4a. Defective blower
Cleaning hints:
1. Wipe up spills as soon as possible.
2. Clean cabinet regularly to avoid heavy dirt build-up.
3. Make a test spot with cleaner.
4. Follow manufacturer's directions on cleaner.
5. Do not mix cleaners.
6. Avoid drips and splashes.
Method
1. Wipe with soft, damp cloth.
2. Rinse with hot water.
3. Wipe Dry.
1. Rinse after steam cleaning.
2. Wipe Dry
Apply with soft, clean cloth.
Follow oven cleaner manufacturer's
instructions
1. Apply with soft, clean cloth.
2. Wipe with damp cloth.
Insulated
FL-2251
Hot Cabinet
Rev. 11 (5/14)
Page 3 of 5