Digilock numeris aspire Producthandleiding - Pagina 5
Blader online of download pdf Producthandleiding voor {categorie_naam} Digilock numeris aspire. Digilock numeris aspire 6 pagina's. Touch rfid latch mechanism
Ook voor Digilock numeris aspire: Installatiehandleiding (16 pagina's), Producthandleiding (11 pagina's)
Pagina afdrukken
Programming Instructions
Remove User Credentials
The locks must be reprogrammed to remove user credentials from operating a lock.
1
Collect all remaining and replacement user credentials.
3
or
Insert a valid Manager Key or present a valid Manager RFID again.
Three sets of two-tone beeps will be heard and the LED and Reader
will turn off.
All previously assigned user credentials will be removed.
Operating Instructions - In Assigned Use Functionality
In assigned use functionality, users operate the lock with their assigned user credential (User Key or RFID).
Operate with a User RFID
To unlock: Touch
then
`
present an assigned
User RFID.
To relock: Close the door.
5
Product Guide
Operate with a User Key
To unlock: Insert an assigned
User Key.
To relock: Close the door.
Touch RFID
Latch Mechanism
2a
Touch and hold
for 5 seconds (a two-tone beep will be heard
`
after 5 seconds) then release.
The LED will flash and the Reader will turn on.
Insert a valid Manager Key or present a valid Manager RFID.
A two-tone beep will be heard.
4
Follow Assign User Credentials instructions to assign the remaining
and replacement user credentials.
or
Operate with a Manager
Credential
To unlock: Insert a valid
Manager Key or
touch
then
`
present a valid
Manager RFID.
To relock: Close the door.
Assigned Use Functionality
2b
or
Operate with the
Programming Key
To unlock: Touch
then insert
`
the Programming
Key.
To relock: Close the door.