Digilock Curve Producthandleiding - Pagina 2
Blader online of download pdf Producthandleiding voor {categorie_naam} Digilock Curve. Digilock Curve 11 pagina's. Keypad | basic & advanced
Ook voor Digilock Curve: Producthandleiding (8 pagina's)
Pagina afdrukken
SETUP
Locks are shipped with factory default settings (operates by pressing
Key and Manager Key(s).
1
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn on.
PROGRAMMING INSTRUCTIONS
Express Register Manager Keys
The Programming Key can quickly program multiple locks to operate with the same Manager Keys.
1
Go to a lock already programmed to
operate with the Manager Keys.
Press
= ` 61 `
The LED will turn on.
4
End express registration mode.*
Go to any programmed lock.
Press
.
= `
*The Programming Key will continue to function in express registration mode until it is used to operate a lock.
2
P R O DU CT GU I D E
Keypad | Basic & Advanced
2
Insert one Manager Key at a
time.
A two-tone beep will be
heard for each Manager Key
programmed.
2
Insert the Programming Key.
A two-tone beep will be heard and the
.
LED will turn off.
5
Then insert the Programming Key.
). Each lock must be setup to operate with a Programming
= `
3
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
3
Insert the Programming Key to program
each lock to operate with the same
Manager Keys.
Two sets of two-tone beeps will be heard
and the LED will flash twice to indicate
successful programming.
6
To return the bolt to the original position,
press
Key.
4
Repeat previous steps for each
lock or follow instructions to
Express Register Manager Keys
to setup all locks.
, then insert the Programming
= `