Digimax 210 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Digimax 210. Digimax 210 12 pagina's. Programmable thermostat compatible with maxi controller
Ook voor Digimax 210: Gebruikershandleiding (11 pagina's)

Pagina afdrukken

To change the "Set Point" (i.e. temperature requested), press

and hold the "SET" key and at the same time press "+" or "-"

to select the temperature setting. The display will show the

"Set Point" until the "SET" button is released. The display will

then show the ambient temperature.

When the DigiMax 200 instructs your heating system to switch

on, a small flame symbol appears at the bottom right of the

display.

II. Installation :

DigiMax 210 Technical Data

Temperature Range :

5°C to 35°C in 1°C steps

16°C to 35°C selectable

Differential :

<1°C at 4K per Hour

Ambient temperature :

Operating 0°C to 45°C

Power Supply :

3 type AA 1.5 v alkaline cells

Switch :

230v ac 2 (1)A

Battery Life :

2 years Typical

Maintenance :

no user maintenance required

RF range :

30 meters

Please read all installation instructions before proceeding.

The RF DigiMax 210 works with batteries. It does not need

any wire. If you wish it to replace an old cable thermostat,

isolate and secure the old wires, which are useless now. Do

not forget to cut the power when you take off the old thermo-

stat.