Crescendo audio BC3500D Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Crescendo audio BC3500D. Crescendo audio BC3500D 8 pagina's.

SPEAKER OUTPUT

This terminal connects the Crescendo BC amplifiers to your speakers . Minimum speaker cable should be

12 gauge or larger since our amplifiers put out epic power.

Connect the speakers by checking the impedance as 1 ohm for single unit or 2 ohm for link connection.

LINK CONNECTION

Step 1. Connect the master amplifier to the head-unit and set its output master / input slave

switch to output master.

Step 2. Set slave amplifier output master / input slave switch to slave input.

Step 3. Connect RCA cable from the master to slave amplifier as shown in the diagram.

MASTER AMPLIFIER

+12V SOURCE

SLAVE AMPLIFIER

Fully adjusted signal is

transferred from master

to slave amp via Rca cable