Crescendo-Systems TC2000 Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Crescendo-Systems TC2000. Crescendo-Systems TC2000 4 pagina's. Transcoder

Setting incorrect scan-frequencies can seriously damage your TV, Crescendo-

Warning!

Systems takes no responsibly implied or otherwise and Crescendo-Systems' total liability

to any customer for any and all claims relating to the use of the TC2000 shall not exceed

the total amount paid by such user to Crescendo-Systems for obtaining this product.

Specifications

The TC2000 offer the user total flexibility and has the following specifications and

features:

• Highly flexible VGA (RGBHV) to Component (YPrPb) transcoder

• Buffered VGA loop-through

• Transparent timing supports most video formats, interlaced or progressive

• User selectable color conversion

• Drives cables of up to 50 feet (16m)

• High bandwidth (>130MHz) signal processing

• Input on a female VGA connector

• Loop-through output on a female VGA connector. Gain=1 when driving 75 Ohm

• Component (YPrPb) output on three color-coded RCA connectors. Vout=1Vp-p

when driving 75 Ohm

Included in this package are one TC2000 and one external power supply. The manual

with warrantee statement will be sent by email and optionally can be directly downloaded

from the

Crescendo-Systems

Setup

In order to successfully use your TC2000 just follow the simple steps outlined below.

1. Make sure that your source device has the ability to correctly set the timing

needed by your display. If this is not the case, do not use the TC2000.

2. Connect your source to the TC2000 using a VGA cable with male HD15

connector.

3. Connect the TC2000 to your display using the Component output jacks.

Additionally, you can connect a VGA monitor to the VGA (loop-through) output.

4. Make sure that the source device has the correct timing setup, if necessary verify

this by using a multi-sync monitor connected to the loop-through output. This is

an important step and should not be taken lightly. When using PowerStrip™

please familiarize yourself with this program first.

5. Select the desired color conversion by choosing the polarity of the sync:

a. H-sync and V-sync negative: color conversion for 480p

b. H-sync and V-sync positive: color conversion for 540p/720p/1080i

Be sure to always set the same polarity for H-sync and V-sync, otherwise your

display may not correctly lock to the signal and may become damaged.

website.

TC2000 users manual v1.1