Crescent SC8000 Gebruikers- en onderhoudshandleiding - Pagina 2
Blader online of download pdf Gebruikers- en onderhoudshandleiding voor {categorie_naam} Crescent SC8000. Crescent SC8000 2 pagina's.
Pagina afdrukken
ATTENTION! Do not use the machine before you have read and understood the Instructions for use manual.
1. Check the Diesel fuel tank level /
LPG bottle charge. In case re-fill/
change the LPG Bottle
6. Install the cylindrical broom/side
brush or brooms
11. Press the forward pedal and start
operating the machine – all
functions will activate upon the
motion of the pedal
16. Remove and clean the hopper
2. F ill the tank with clean water. The
clean water temperature must not
exceed 40 °C
7. Turn the ignition key to "I" and
press the throttle button (if you
want to raise your rpm from idle)
12. Press the EcoFlex™ switch when-
ever you temporarily need a greater
cleaning power
17.Remove and clean the brushes
3. F ill the Ecoflex tank with a
detergent suitable for the work to
be performed (highly concentrated
detergent)
8. Lower the deck and select the
desired scrubbing pressure
(squeegee lowers automatically)
13. Empty the recovery tank with the
hose. Then empty the solution tank
with the transparent hose
18. Take the squeegee off, check the
blades wear status
4. Install the squeegee and fasten it
to its assembly then connect the
vacuum hose to the squeegee
9.Adjust to the desired water flow
14. Wash with clean water the recov -
ery tank and the vacuum grid.
Remove and clean the debris tray
19. Remove the side skirts and check
the blade status
www.crescentindustrial.co.uk
SC8000
5. Adjust Squeegee height and
inclinatione.
10. Adjust to the desired chemical
concentration (shown in the
display)
15. Close the solution tank valve and
remove and clean the filter
20. Clean the machine using a damp
cloth and park it with the recovery
tank open