Crescent duo lightway Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Crescent duo lightway. Crescent duo lightway 16 pagina's.

1
4
Assembly instructions
1. Chassis
Out of the box the Comfort is fully assemb-
1. To open the chassis
led and ready for use except wheels, seatu-
Pull the folding catch to the side and lift the
nit and canopy.
handle upwards (2) until the handle locks in
place.
2. To unfold
To open the Comfort chassis stand behind
3. Attach rear axle and wheels and functions
the pushchair and, with both hands on the
Push the axle onto the rear legs (4) until the
pushbar, pull-up until the chassis clicks into
spring clips have popped through the holes.
place.
Push the stems of the rear wheels into the
axle until they click in place. Pull the wheel
3. Attach the wheels
gently to make sure they are secure. To re-
Open the wheel lock by pressing. Place the
move the rear wheels, push the silver button
wheel into the axle. Release locking catch
in and pull the wheel outwards.
when fully inserted and wheel should lock
into position. Pull on wheel to ensure that it
5. To operate the brakes
is securely fitted. This process is repeated
With your foot, push the foot pedal on the
all around.
right si de down until it clicks in to place (3).
Lift upwards to release the breaks.
2
5
WARNING! Ensure that all the locking
4. Attaching the seat unit or carrycot
devices are engaged before use.
Engage the brake and place the seat unit
or carrycot over the chassis. When the seat
6. Front wheel assembly and functions
unit or carrycot is correctly fitted a click will
Push the front wheels on to the front legs of
be heard on each side. Ensure that it is se-
the chassis until they click into place. Pull
curely attached before use.
them gently to make sure they are secure.
Push the swivel catch up to select fixed
4b. Detaching seat unit or carrycot
wheels or down for swivel wheels.
Press the release buttons on both sides
To remove the front wheels you can either
and lift straight up. Marked by arrow.
push the button in and pull the wheel unit
and stem off or you can just remove the
5. Attaching the canopy
wheel unit by pushing the button located
Fit the canopy by linserting the canopy hol-
on the bottom of the leg and pull the wheel
ders in the holes on both sides.
unit off.
6. Adjusting the backrest
Use the handle on the rear of the backrest
to adjust the backrest to desired position.
3
6