Digimerge DCV54DL Snelstarthandleiding - Pagina 2
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Digimerge DCV54DL. Digimerge DCV54DL 2 pagina's. 700+ tvl. varifocal ir dome camera
Pagina afdrukken
Installing the Camera
ATTENTION
- Test the camera prior to selecting a permanent
mounting location by temporarily connecting the camera(s) and
cables to the DVR or Observation System.
1. Rotate the camera base counter
clockwise to separate it from the ball
camera and dome cover.
2. Mount the camera base to the wall or
ceiling using the included screws.
3. Feed the BNC/power termination cable
through the camera base. Connect
video and power cable as described
in the next section, 'Setting up the
Camera'.
4. Position the dome cover over the
camera and screw it clockwise half way
onto the camera base.
5. Move the ball camera to the desired
position, and while holding the ball
camera firmly in place, screw the dome
cover the rest of the way to secure it to
the camera base. Holding the camera
prevents it from moving while installing
the dome cover.
Setting up the Camera
1. Connect the BNC connector of the camera
to the video cable.
2. DC Power—Power Adapter: Connect a
12V DC Power Adapter (not included) to
the camera. Plug the Power Adapter into a
local power outlet.
• DC Power—Power Pigtail (not included):
Connect a Power Pigtail to the camera.
Connect the terminating wires of the cable
directly to the DC power source.
NOTE: The Power Pigtail is a non-polarity input. You can
connect the wires to either the positive or negative ports of
the DC power source.
• AC Power—Connect a Power Pigtail
(not included) to the camera. Connect the
terminating wires of the cable directly to
the 24V AC power source.
3. Use a screwdriver to adjust the ZOOM and
FOCUS control screws as required.
Camera Base
4. Insert rubber weatherproofing plugs
(2x) firmly into the Zoom and Focus
screw holes to ensure a weatherproof
seal.
Weatherproofing Plugs
ZOOM
FOCUS
Weatherproofing
plug inserted in
Focus screw hole
Camera Specifications
Image Sensor
1/3" Sony EX-View™ II 960H
Video Format
NTSC
Effective Pixels
H: 976 V: 494
Horizontal Resolution
700+ TVL
Scan System
2:1 Interlace
Sync System
Internal
S / N Ratio
>50dB (AGC Off)
Iris
AES
AES Shutter Speed
1/60 ~ 1/100,000 sec.
Min. Illumination
0.15 LUX @ F2.0 (IR Off)
0 LUX (IR LEDs ON)
Video Output
Composite 1.0Vpp @ 75ohm
Lens Focal Length / Type
2.8–12mm F1.4 / Varifocal
FOV (Diagonal)
28–93°
Termination
Video: BNC Female
IR Range / Qty.
100ft / 31m; 28 LED's
Power Requirement
12V DC ± 10% / 24V AC ± 10%
Power Consumption
12V: 600mA max / 24V: 400mA max
Operating Temp. Range
–4° ~ 122°F / –20° ~ 50°C
Environmental Rating
IP66
Dimensions (LxWxH)
4.8" x 4.8" x 4.1"
120mm x 120mm x 102mm
Weight (including stand)
1.6lbs / 0.7kg
Dimensions
102mm
4.1"
120mm / 4.8"