Digimerge DPD23D Gebruiksaanwijzing - Pagina 12
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Digimerge DPD23D. Digimerge DPD23D 14 pagina's. Ultra resolution day & night dome camera
Ook voor Digimerge DPD23D: Specificatie (2 pagina's), Gebruiksaanwijzing (15 pagina's), Gebruiksaanwijzing (15 pagina's)
Pagina afdrukken
CAMERA ADJUSTMENT
D-EFFECT: Applies digital effects to camera image.
1. Highlight 'D-EFFECT' in the SPECIAL setup menu.
SPECIAL
1. CAM TITLE
2. D-EFFECT
3. MOTION
4. PRIVACY
6. SYNC
7. LANGUAGE
2. Press the joystick to access the submenu.
8. RETURN
D-EFFECT
FREEZE
MIRROR
D-ZOOM
NEG.IMAGE
RETURN
3. FREEZE: Freezes current image displayed
4. MIRROR: MIRROR will mirror the image.
V-FLIP, will flip the image vertically.
ROTATE, will vertically flip and also mirror.
OFF, no image effect applied.
5. D-ZOOM: Allows digital zoom and position to be set.
D-ZOOM
D-ZOOM
PAN
TILT
RETURN
Digital Zoom can range from 1x to 32x. Too much digital zoom will result in blocky image
Pan / Tilt range is -100 to 100.
OFF
OFF
OFF
INT
ENGLISH
END
OFF
OFF
OFF
OFF
RET
x 1.0
----|----
0
----|----
0
RET
-18-
CAMERA ADJUSTMENT
MOTION:
You can monitor activity more efficiently, because a signal is generated by the camera
whenever motion is detected. Visual notification is also available.
1. Highlight 'MOTION' in the SPECIAL setup menu
SPECIAL
1. CAM TITLE
2. D-EFFECT
4. MOTION
5. PRIVACY
6. SYNC
7. LANGUAGE
8. DEFECT
2. Move the the joystick left/right to change setting to OFF/ON
9. RETURN
3. Press the joystick to access the submenu for ON setting
MOTION
AREA SELECT AREA�
AREA DISPLAY ON
SENSITIVITY
-------|- ��
MOTION VIEW OFF
RETURN
RET
- AREA SELECT:
Select motion detection area number. AREA 1-4
With the area slected will be shown ashing on and off visually.
- AREA DISPLAY:
Turns selected motion detection area ON or OFF.
Pressing joystick when ON will change display to set
the position and the size of the area. Moving the joystick
will change the setting, and press joystick to accept.
After you have set both position,size you can RET or AGAIN
- SENSITIVITY:
Adjust sensitivity for selected motion detection area (0-40).
- MOTION VIEW:
Turn motion detection view ON or OFF. When turned on,
upon detection of motion, motion is shown as green dots
to indicate area in which motion is taking place.
Notes
• Motion detection is normally part of a DVR which would provide more exible customization options.
OFF
OFF
OFF
INT
ENG
RET
POSITION
MOTION
-19-