Diginet RAPIX DGOZ-LLS-M Installatiehandleiding - Pagina 4
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Diginet RAPIX DGOZ-LLS-M. Diginet RAPIX DGOZ-LLS-M 8 pagina's. Light level sensor with three inputs for pir sensors
Pagina afdrukken
RAPIX Lighting Control System
8. Connecting the Light Level Sensor to a RAPIX eHub
The Light Level Sensor is only suitable for use with the RAPIX eHub.
The Light Level Sensor can be connected and powered from any of the four eHub smart channel inputs.
Patch leads are provided to connect the Light Level Sensor to the eHub as shown below.
9. Connecting a PIR sensor to the Light Level Sensor
Up to three RAPIX PIR sensors can be connected to a Light Level Sensor, as shown below.
RAPIX Light
RAPIX PIR
Level Sensor
occupancy
sensor
connections
Note: The 3 x sensor connections can also be used as dry
contact input connections to an eHub.
The dry contact should be connected across the 'S' and '+'
terminals of the patch lead terminals shown above.
Patch lead
Up to 25m
RAPIX PIR occupancy sensor
RAPIX Light Level Sensor
4