Diginet LEDsmart+ MultiMate MMTM/PB Installatiehandleiding - Pagina 7
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Diginet LEDsmart+ MultiMate MMTM/PB. Diginet LEDsmart+ MultiMate MMTM/PB 15 pagina's. Push button minute timer
Pagina afdrukken
E: Setting Off State Indication
When the timer is switched off, the white LED indicators in the timer can be set to glow or turn off.
By Default, the white LED indicators are set to glow when the timer is turned off.
To set the LED indicators to turn off when the timer is off, follow the steps below.
Step 1
Enter into the timer Setup Mode - See PART A
Step 2
Click the push button 5 times
Step 3
The LED Indicator will blink 5 times
Note: To cancel/exit do nothing for 30 seconds
Step 4
To set Indicator to glow on when timer is off
Push the button until the lamp(s) turns ON
To set Indicator to turn off when timer is off
Push the button until the lamp(s) turns OFF
Note: To cancel/exit do nothing for 30 seconds
Step 5
Click once to save & exit
Push Button Minute Timer
7