Accusplit Eagle 1640M4 Gebruiksaanwijzing - Pagina 2
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Accusplit Eagle 1640M4. Accusplit Eagle 1640M4 2 pagina's. Accusplit memory pedometer instruction manual
Ook voor Accusplit Eagle 1640M4: Gebruiksaanwijzing (2 pagina's), Handmatig (2 pagina's)
Pagina afdrukken
AUTO MOVEMENT SENSOR
1. To filter out random movements, the unit remains in
standby mode until 5 continuous steps are registered.
Only then are the 5 steps calculated in, and an Active
indicator "▲" appears on the upper left of display.
2. When regular walk/run movement stops, after 2 seconds
the timer pauses and the unit switches to standby status
(Active indicator "▲" disappears).
RESETTING YOUR PEDOMETER
Most people prefer to reset step counts daily. To reset: While
displaying Day's STEPs, DISTANCE, or ACTIVITY TIME, press
and hold yellow RESET button for at least two seconds to
reset all of these to zero. When displaying Total STEPs, press
yellow RESET button for two seconds to reset all counts,
including Total STEPS, to zero.
NO-PROOF-OF-PURCHASE LIMITED WARRANTY
See label inside the lid of your pedometer
REPLACING THE BATTERY
When the display starts to dim or goes blank, it is time to replace
the battery. Your pedometer uses one Type LR43 (L1142) 1.5 volt
alkaline battery. To replace:
1. Insert a coin into the slot on the bottom of the case, and twist
counterclockwise to loosen the case front. Lift case front away.
2. Using a pen or other thin object, push battery sideways out
of its holder. Replace it with a new battery. The battery's
positive (+) terminal should be FACE UP while you put it into
the pedometer.
3. Align case front over the pedometer and press gently to snap
cover back into place, starting with top.
REGISTER NOW
Please return
your AE1640M4 Registration to
the Repair Center address in the
warranty, and we will let you know
about future products.
Email (preferred)
User