digiO2 ECG-10X Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} digiO2 ECG-10X. digiO2 ECG-10X 13 pagina's. Ecg/ekg recorder

Pagina afdrukken

Operating Instructions

Power on / off

Press

to turn on / off Cardio Care.

After the welcome message, You will

enter main menu automatically, where

you can proceed on taking measurement,

checking historical record or adjusting

setting.

Measurement

A. Make sure to be in a relaxed condition.

The ideal posture of being seated

comfortably with your back straight is

suggested. However, measurement

can still be made while you are

standing, lying down or in other

comfortable positions.

B. Use your right hand to hold the unit

properly with your fingers gently

pressed on the side electrodes. Please

refer to the figure.

< main menu >

Press button

and start to

measurement.

C. Press

and it will start measuring with a beep sound after 5 seconds.

Place the unit with the back end electrode against the spot slightly

below your chest, The measurement will stop after 30 seconds of

recording automatically and is accompanied with a beep sound,The

heart rate will be shown on the page and press

About 2 inches

below your left nipple

D. The unit will ask automatically if

you want to upload the record to

server, press

to upload or

skip.

E. After selection, it will go into the page of showing historical record list

immediately. More details about the record reading will be shown in the

"Historical Record" section.

<NOTE>

Please use ONLY your right hand to take the measurement

After press

the device will

show the loading page, and

then start to measurement.