Cisco 2960 8TC - Catalyst Switch Aan de slag handleiding - Pagina 15
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco 2960 8TC - Catalyst Switch. Cisco 2960 8TC - Catalyst Switch 23 pagina's. 8-port switches
Pagina afdrukken
Install the SFP Modules and Connect to the Ports
Follow these steps:
Grasp the module on the sides, and insert it
Step 1
into the switch slot until you feel the
connector snap into place.
Insert an appropriate cable into the module
Step 2
port.
Insert the other cable end into the other device.
Step 3
For a list of supported modules, see the release notes on Cisco.com. For detailed instructions on
installing, removing, and connecting to SFP modules, see the documentation that came with the
SFP module.
Removing and installing an SFP module can shorten its useful life. Do not remove and
Caution
insert SFP modules more often than is absolutely necessary.
5 x
6 x
7 x
C a t a l y
8 x
SFP module
5 x
6 x
7 x
C a t a l y
8 x
SFP module port
s t 2 9 6
0
S
er ie s
1
s t 2 9 6
0
S
er ie s
1
15