BYECOLD HH0606L Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} BYECOLD HH0606L. BYECOLD HH0606L 10 pagina's. Infrared heater panel with led light

Pagina afdrukken

3. Push the rear of the left long frame into the hook, and then push back to make the

rear of the right long frame into the other hook.

Note: 1.Hooks are for the two long frames only, not the two short ones!

2.Make sure the hooks are between the two limit screws !

WARNING

To avoid falling off, you must slide the panel left and right to make sure the

two hooks have been completely put into the rear of the two long frames!

7┃ THERMOSTAT

Specification

• Battery-powered: DC 4x 1.5V AAA batteries (not included)

• Set temperature range: 0°C ~ 45°C, resolution: 1°C

• Room temperature range: 0°C ~ 50°C, display resolution: 0.1°C

• Accuracy of the measured temperature: ±0.5°C

• Working environment range 1°C ~ 50°C

• Radio frequency 433.92MHz

Description

1. This thermostat also includes individual operation part for LED light.

2. The thermostat acquires the room temperature with its integrated sensor and

transmit signal to the panel to turn on/off heating as the ambient temperature

changing, in order to maintain a constant room temperature. When the ROOM

temperature is 0.5°C higher than the SET temperature, thermostat will send OFF

commands to panel; When the ROOM temperature is 0.5°C lower than the SET

- 4 -