Digiop BLK-IPS101 Snelle installatiehandleiding - Pagina 2

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} Digiop BLK-IPS101. Digiop BLK-IPS101 4 pagina's. H.264 network ip camera

Pagina afdrukken

Review the list of IP devices found by IPAdmin Tool. You can identify your camera by the MAC

address. If the camera was not found, click the Refresh button every minute until your camera

appears in the list.

After finding your camera, right click the entry, then select IP Address from the drop-down list. An

IP Setup window will open.

In the IP Setup window, click the Static option bullet. If you have other compatible network

settings you want to apply to the device, enter them in the appropriate locations. Click Setup to

save settings.

In the Login window, enter the ID and PW

(password) for your camera, then click Login. The

default administrator values for the ID and PW are

root and pass.

In the IPAdmin Tool window, click Refresh. Verify that the entry representing the camera now

shows the (new) static IP address.

Continue with procedure Step 5. Setup camera Basic Configuration.

Installing cameras on LANs without DHCP

In networks without a DHCP server, cameras must be powered on and reconfigured one at a time to avoid

addressing conflicts between other cameras, or possibly with another device on the network. Configuring

the network settings of your cameras includes these steps:

Determine the network settings of your computer.

—

Check the network for compatibility with the default static network settings of your camera.

—

Find an IP address that is not in use and can be assigned to your camera.

—

Attach your camera to the network, power it on, and configuring it with new network

—

settings.

Determine the network settings of your computer

At a PC attached to the LAN where your camera will be connected, determine the IP address, subnet

mask, and default gateway of your PC. To find this information:

Hold down the Windows key and press r to

open the Run dialog box.

Type cmd in the entry field, then click OK to

open the Command Prompt window.

At the command prompt, enter ipconfig. The response will show the your PC's network

settings.

www.digiop.com

Static Option

Record the IP Address, Subnet Mask, and Default Gateway for your PC's Ethernet adapter for

future reference.

The Ethernet adapter data you see by using ipconfig will probably be different from that shown

NOTE

in the example above. If you are using Windows Vista or Windows 7, the IP address is identified

as the "IPv4 Address."

Check LAN for default IP address compatibility

Before connecting your camera to the LAN, check the network to see if IP address 192.168.0.100 is already

in use. At a Microsoft Windows computer attached to the LAN where the camera will be connected, open a

Command Prompt window and enter:

ping 192.168.0.100

The "Request timed out" response indicates that the IP address is not in use and the camera can be

connected without causing conflicts. If the response from the ping command received a "Reply..", the IP

address is in use. Contact Technical Support for further assistance, if needed.

Find network settings (IP addresses) that are not in use

At your PC, find an IP address on your network that is not in use:

Write down the EXACT IP address of your PC up to the third/last period. Using the example

shown above, this expression is: 192.168.1. After the third period, include any number

between 1 and 254 that is different from the one in your PC's IP address, 168. As a first try,

let's choose 200, which will form the IP address 192.168.1.200.

Next, use the ping command in the Command Prompt window to see if this IP address is in

use on your network. Enter:

ping 192.168.1.200.

In the example shown above, the message "Reply from 192.168.1.200: .." indicates that

your PC can reach a device with that IP address, and that address is in use (i.e., you cannot

use it for your camera).

Since the ping test showed that 192.168.1.200 is in use, try another number between 1 and

254. Let's try to ping 192.168.1.201. At the command prompt, enter: ping 192.168.1.201

In this test, the message "Request timed out" indicates that your PC cannot reach the

device with that IP address, and that address is probably not in use. If this test showed that

this IP address is in use, try other IP addresses using the steps above until an unused address

is found.