Cisco 3020 - Cisco Catalyst Blade Switch Aan de slag handleiding - Pagina 7

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco 3020 - Cisco Catalyst Blade Switch. Cisco 3020 - Cisco Catalyst Blade Switch 37 pagina's. Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
Ook voor Cisco 3020 - Cisco Catalyst Blade Switch: Aan de slag handleiding (31 pagina's), Quickspecs (12 pagina's), Release Release (41 pagina's), Release Release (27 pagina's), Release Release (23 pagina's), Release Release (21 pagina's), Installatiehandleiding (21 pagina's)

Pagina afdrukken

Cisco 3020 - Cisco Catalyst Blade Switch Aan de slag handleiding

Follow these steps to install the switch module in the blade server:

If you have not already done so, touch the static-protective package that contains the switch

Step 1

module to an unpainted metal part of the blade server for at least 2 seconds.

Remove the switch module from its static-protective package.

Step 2

Step 3

Remove the interconnect blank from the bay where you plan to install the switch module, if

one is present, and install the switch module. (See Figure 3.)

Figure 3

Removing the Interconnect Module Blank from the Blade Server

Lever for the interconnect module blank