Cisco 3020 - Cisco Catalyst Blade Switch Aan de slag handleiding - Pagina 11

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco 3020 - Cisco Catalyst Blade Switch. Cisco 3020 - Cisco Catalyst Blade Switch 31 pagina's. Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
Ook voor Cisco 3020 - Cisco Catalyst Blade Switch: Aan de slag handleiding (37 pagina's), Quickspecs (12 pagina's), Release Release (41 pagina's), Release Release (27 pagina's), Release Release (23 pagina's), Release Release (21 pagina's), Installatiehandleiding (21 pagina's)

Pagina afdrukken
Cisco 3020 - Cisco Catalyst Blade Switch Aan de slag handleiding
Follow these steps to install the switch module in the blade enclosure. The illustrations in this section
show the Cisco Catalyst Blade Switch 3020 for HP switch module. The instructions are the same for
the Cisco Catalyst Blade Switch 3120 for HP switch module.
If you have not already done so, touch the static-protective package that contains the switch
Step 1
module to an unpainted metal part of the blade enclosure for at least 2 seconds.
Remove the switch module from its static-protective package.
Step 2
Remove the interconnect blank from the bay where you plan to install the switch module, if
Step 3
one is present, and install the switch module. (See Figure 4.)
Figure 4
Removing the Interconnect Module Blank from the Blade Enclosure
1
Lever for the interconnect module blank
1
11