Cisco 3550 48 - Catalyst SMI Switch Product Bulletin - Pagina 2
Blader online of download pdf Product Bulletin voor {categorie_naam} Cisco 3550 48 - Catalyst SMI Switch. Cisco 3550 48 - Catalyst SMI Switch 5 pagina's. Cisco catalyst 3550-48: supplementary guide
Ook voor Cisco 3550 48 - Catalyst SMI Switch: Product Bulletin (3 pagina's), Gegevensblad (21 pagina's), Vragen en antwoorden (9 pagina's)
Pagina afdrukken
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Generic Online Diagnostics Framework (GOLD) for Cisco Catalyst 3560—GOLD is a
●
fault detection framework that provides troubleshooting tools for customers and the Cisco
Technical Assistance Center (TAC) and can be either run on demand or scheduled.
Supports the same level of GOLD functionality available on the Cisco Catalyst 3750.
◦
Power over Ethernet (PoE) MIB—A new CISCO-POWER-ETHETNET-EXE-MIB provides
●
PoE visibility and allows administrators to proactively monitor power usage. Table 1
describes managed objects related to PoE.
Table 1.
Overview of New PoE MIB Object Types
MIB Object Type
Object Description
SET
● Enable PoE mode (auto/static and so on)
● Max power allowed on this port (optional)
● Threshold for allocated power
● When allocated power exceeds specified threshold
TRAP
● PoE mode (auto/static and so on)
GET
● Operational status (power deny/on/off scenarios)
● Power allocated (through Cisco Discovery Protocol negotiation or power class) on the interface
● Type of the device plugged into the port
● IEEE power classification class
Enhanced Object Tracking (EoT)—Provides ability for Hot Standby Router Protocol
●
(HSRP)-like protocols to monitor the link and route state objects and dynamically adjust to
state changes. This provides increased network availability during failover.
STACK MAC Persistent Timer—Currently, when a stack master is removed and a new
●
master takes over, by default, the MAC address of the new stack master becomes the new
stack MAC router address. This feature enables users to configure a timer to allow a time
delay before stack MAC address changes to the new master MAC address. A value of "0"
helps ensure the original master MAC address remains the stack MAC router address, thus
making it transparent to the endpoints.
Cisco Catalyst Blade Switch 30x0 Series carry no new features in this release. However,
●
the common bug fixes to the 12.2(35)SE release are included
Table 2 describes product support for new features of Cisco IOS Software Release 12.2(35)SE for
enterprise switches.
Table 2.
Cisco IOS Software Release 12.2(35)SE New Features for Enterprise Switches
IPB = IP Base Feature Set
IPS = IP Services Feature Set
AIS = Advanced IP Services Feature Set
X = supported; N = not supported
3750 = Cisco Catalyst 3750 Series Switches
3560= Cisco Catalyst 3560 Series Switches
3550 = Cisco Catalyst 3550 Series Switches
2970 = Cisco Catalyst 2970 Series Switches
Product Bulletin
Page 2 of 5