Cisco 3560-48PS - Catalyst Switch Gegevensblad - Pagina 4

Blader online of download pdf Gegevensblad voor {categorie_naam} Cisco 3560-48PS - Catalyst Switch. Cisco 3560-48PS - Catalyst Switch 23 pagina's. Cisco catalyst 3560-48ts: product brochure
Ook voor Cisco 3560-48PS - Catalyst Switch: Product Bulletin (5 pagina's), Product ondersteunings bulletin (6 pagina's), Specificaties (3 pagina's), Technische specificaties (8 pagina's), Product ondersteunings bulletin (4 pagina's), Brochure (8 pagina's)

Data Sheet

than traditional network management capabilities. Cisco EnergyWise's management interfaces

allow facilities and network management applications to communicate with endpoints and each

other using the network as a unifying fabric. The management interface uses standard SNMP or

SSL to integrate Cisco and third-party management systems.

Cisco EnergyWise extends the network as a platform for power control plane for gathering,

managing, and reducing power consumption of all devices, resulting in companywide optimized

power delivery and reduced energy costs.

Enhanced Security

With the wide range of security features that the Cisco Catalyst 3560 Series offers, businesses

can protect important information, keep unauthorized people off the network, guard privacy, and

maintain uninterrupted operation.

Cisco Identity Based Networking Services (IBNS) provides authentication, access control, and

security policy administration to secure network connectivity and resources. Cisco IBNS in the

Cisco Catalyst 3560 Series prevents unauthorized access and helps ensure that users get only

their designated privileges. It provides the ability to dynamically administer granular levels of

network access. Using the 802.1x standard and the Cisco Access Control Server (ACS), users can

be assigned a VLAN or an ACL upon authentication, regardless of where they connect to the

network. This setup allows IT departments to enable strong security policies without compromising

user mobility-and with minimal administrative overhead.

To guard against denial-of-service and other attacks, ACLs can be used to restrict access to

sensitive portions of the network by denying packets based on source and destination MAC

addresses, IP addresses, or TCP/UDP ports. ACL lookups are done in hardware, so forwarding

performance is not compromised when implementing ACL-based security.

Port security can be used to limit access on an Ethernet port based on the MAC address of the

device to which it is connected. It also can be used to limit the total number of devices plugged into

a switch port, thereby protecting the switch from a MAC flooding attack as well as reducing the

risks of rogue wireless access points or hubs.

With Dynamic Host Configuration Protocol (DHCP) snooping, DHCP spoofing can be thwarted by

allowing only DHCP requests (but not responses) from untrusted user-facing ports. Additionally,

the DHCP Interface Tracker (Option 82) helps enable granular control over IP address assignment

by augmenting a host IP address request with the switch port ID. Building further on the DHCP

snooping capabilities, IP address spoofing can be thwarted using Dynamic ARP Inspection and IP

Source Guard.

The MAC Address Notification feature can be used to monitor the network and track users by

sending an alert to a management station so that network administrators know when and where

users entered the network. The Private VLAN feature isolates ports on a switch, helping ensure

that traffic travels directly from the entry point to the aggregation device through a virtual path and

cannot be directed to another port.

Secure Shell (SSH) Protocol Version 2, Kerberos, and Simple Network Management Protocol

Version 3 (SNMPv3) encrypt administrative and network-management information, protecting the

network from tampering or eavesdropping. TACACS+ or RADIUS authentication enables

centralized access control of switches and restricts unauthorized users from altering the

configurations. Alternatively, a local username and password database can be configured on the

Page 4 of 22