Cisco 3560V2 - Catalyst 48 10/100 Poe Gegevensblad - Pagina 2
Blader online of download pdf Gegevensblad voor {categorie_naam} Cisco 3560V2 - Catalyst 48 10/100 Poe. Cisco 3560V2 - Catalyst 48 10/100 Poe 20 pagina's. Cisco catalyst 3560v2-24ps: specifications
Pagina afdrukken
Configurations
The Cisco Catalyst 3560 v2 Series includes the switches described in Table 1.
Table 1.
Model
3560V2-24TS
3560V2-48TS
3560V2-24PS
3560V2-48PS
3560V2-24TS-SD
Cisco Catalyst 3560 v2 Series Software
The Cisco Catalyst 3560 v2 Series can be purchased with the IP Base or IP Services licenses preinstalled. The IP
Base license offers advanced QoS, rate limiting, ACLs, and basic static and Routing Information Protocol (RIP)
routing functions. The IP Services license provides a richer set of enterprise-class features, including advanced
hardware-based IP unicast and IP Multicast routing as well as policy-based routing (PBR). The Advanced IP
Services license, which includes IPv6 routing and IPv6 ACL support, is now included in the IP Services license.
Upgrade licenses are available to upgrade a switch from the IP Base license to the IP Services license.
Configurable Cisco IOS Software
The Cisco Catalyst 3560 v2 Series can be preconfigured with a specific Cisco IOS Software release at the time of
ordering. This option eliminates the need to reload a specific Cisco IOS Software release during deployment, thereby
reducing deployment time and cost. The Cisco IOS Software release to be preloaded can be selected from a list of
supported Cisco IOS Software releases, including the crypto version.
Cisco EnergyWise
The Cisco Catalyst 3560 v2 series support Cisco EnergyWise, which is a technology that enables monitoring,
reporting, and management of energy consumption by end devices that are Cisco EnergyWise enabled. This
technology enables companies to reduce their energy cost and carbon footprint. These are some of the EnergyWise
features available:
Discover all Cisco EnergyWise enabled devices on the network.
●
Monitor and report power consumption by these devices.
●
Implement business rules to control power to these end devices.
●
More information about Cisco EnergyWise can be found at http://www.cisco.com/go/energywise.
Power over Ethernet
The Cisco Catalyst 3560 v2 Series can provide a lower total cost of ownership (TCO) for deployments that
incorporate Cisco IP phones, Cisco Aironet
end device. PoE eliminates the need for wall power outlets for each PoE-enabled device and significantly reduces
the cost for additional electrical cabling that would otherwise be necessary in IP phone and WLAN deployments. The
Cisco Catalyst 3560 v2 24-port PoE switch can support Class 3 PoE or 15.4W of PoE power on all 24 ports. Taking
advantage of Cisco Catalyst Intelligent Power Management, the Cisco Catalyst 3560 v2 48-port PoE configurations
can deliver the necessary power to support 24 ports at 15.4W, 48 ports at 7.7W, or any combination in between.
Maximum power availability for a converged voice and data network is attainable when a Cisco Catalyst 3560 v2
series switch is combined with the Cisco Redundant Power System 2300 (RPS 2300) for protection against internal
power supply failures and an uninterruptible power supply (UPS) system to safeguard against power outages.
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Switch Configurations
Description
24 Ethernet 10/100 ports and 2 Small Form-Factor Pluggable (SFP)-based Gigabit Ethernet ports; 1 rack unit
(RU)
48 Ethernet 10/100 ports and 4 SFP-based Gigabit Ethernet ports; 1RU
24 Ethernet 10/100 ports with PoE and 2 SFP-based Gigabit Ethernet ports; 1 RU
48 Ethernet 10/100 ports with PoE and 4 SFP-based Gigabit Ethernet ports; 1RU
24 Ethernet 10/100 ports and 2 SFP-based Gigabit Ethernet ports; 1RU, DC power supply
®
wireless LAN (WLAN) access points, or any IEEE 802.3af-compliant
Data Sheet
Page 2 of 20