Cisco 3750 - Catalyst EMI Switch Installatie Manuals - Pagina 41

Blader online of download pdf Installatie Manuals voor {categorie_naam} Cisco 3750 - Catalyst EMI Switch. Cisco 3750 - Catalyst EMI Switch 47 pagina's. Catalyst 3750 series switches
Ook voor Cisco 3750 - Catalyst EMI Switch: Gegevensblad (18 pagina's), Faq (10 pagina's), Product Bulletin (5 pagina's), Product ondersteunings bulletin (6 pagina's), Productoverzicht (25 pagina's), Beschrijving (1 pagina's), Gegevensblad (23 pagina's), Product ondersteunings bulletin (6 pagina's), Aan de slag handleiding (27 pagina's), Gegevensblad (23 pagina's), Aan de slag handleiding (33 pagina's)

Pagina afdrukken

Cisco 3750 - Catalyst EMI Switch Installatie Manuals

Chapter 3

Switch Installation

Removing SFP Modules from SFP Module Slots

Step 1

Step 2

Tip

Step 3

Step 4

Figure 3-37 Removing a Bale-Clasp Latch SFP Module by Using a Flat-Blade Screwdriver

1 3

1 4

1 5

1 6

1 7

1 8

1 9

13 X

2 0

14 X

Bale clasp

78-15136-01

To remove an SFP module from a module receptacle, follow these steps:

Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface on

the chassis.

Disconnect the LC from the SFP module.

For reattachment, note which cable connector plug is send (TX) and which is

receive (RX).

Insert a dust plug into the optical ports of the SFP module to keep the optical

interfaces clean.

Unlock and remove the SFP module, as shown in

If the module has a bale-clasp latch, pull the bale out and down to eject the

module. If the bale-clasp latch is obstructed and you cannot use your index finger

to open it, use a small, flat-blade screwdriver or other long, narrow instrument to

open the bale-clasp latch.

2 1

2 2

C a t a ly s t

2 3

2 4

3 7 5 0

23 X

24 X

S E R IE S

Catalyst 3750 Switch Hardware Installation Guide

Installing and Removing SFP Modules

Figure

3-37.

3-41