Cisco 4503 - Catalyst Switch Overzicht - Pagina 21
Blader online of download pdf Overzicht voor {categorie_naam} Cisco 4503 - Catalyst Switch. Cisco 4503 - Catalyst Switch 46 pagina's. Line cards
Ook voor Cisco 4503 - Catalyst Switch: Beschrijving (2 pagina's), Handleiding (2 pagina's), Gegevensblad (23 pagina's)
Pagina afdrukken
Chapter 1
Module Overview and Specifications
Figure 1-20 WS-X4224-RJ45V 24-Port IEEE 802.3af-Compliant PoE 10/100BASE-TX Switching Module
Note
78-13267-06
Specification
Connector type
Cable type
Power over Ethernet
Power regulation
To provide PoE with the 24-port PoE 10/100BASE-TX switching module in a
Catalyst 4006 switch, you must have a power entry module (PEM) and a power
shelf installed. The Catalyst 4006 switch can provide 312 W per PoE module to
powered devices. If the powered devices are using the maximum 15.4 W per port,
there is only enough power for 18 powered devices. If the powered devices are
using less than 15.4 W per port, more powered devices can be powered, up to the
312 W maximum. For more information about installing the PEM or the external
power shelf, refer to the Catalyst 4000 Series Installation Guide, Catalyst 4500
Series Installation Guide, Installation and Configuration Note for the Catalyst
4500 Series AC Power Shelf, or the Catalyst 4500 Series Power Entry Module and
External Power Shelf Installation Note.
To provide PoE with the 24-port PoE 10/100BASE-TX switching module in a
Catalyst 4500 series switch, you must have a PoE-enabled power supply. All
power supplies support PoE except the 1000 W and 1400 W AC power supplies.
Auto MDIX is not supported on PoE enabled switching modules.
Ethernet and Fast Ethernet Switching Modules
Description
RJ-45 (See
Figure 2-1 on page
UTP
Up to 15.4 W per powered device on all 24 ports
(to a 312 W total on the Catalyst 4006)
Internal on the switching module
Catalyst 4500 Series Module Installation Guide
2-2.)
1-21