Cisco 9124 - mds multilayer fabric switch Configuratiehandleiding - Pagina 17

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco 9124 - mds multilayer fabric switch. Cisco 9124 - mds multilayer fabric switch 49 pagina's. Mds 9000 series
Ook voor Cisco 9124 - mds multilayer fabric switch: Specificaties (2 pagina's), Gegevensblad (9 pagina's), Specificaties (3 pagina's), Release Release (48 pagina's), Release Release (44 pagina's), Release Release (36 pagina's), Release Release (22 pagina's), Release Release (3 pagina's), Release Release (40 pagina's), Handmatig (16 pagina's), Hardware installatiehandleiding (36 pagina's)

During setup, the install procedure places a Microsoft iSCSI Initiator icon

desktop as well as in the control panel. The Microsoft iSCSI Initiator also has a CLI. Refer to the user

guide for more information.

Figure 3 Microsoft iSCSI Initiator icon

To install the Microsoft iSCSI Initiator:

Double-click the Microsoft iSCSI Initiator icon to open the iSCSI Initiator Properties window

(Figure

4).

Figure 4 iSCSI Initiator Properties window

Click Add to add the IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module

(14/2),, or MDS 9216i switch iSCSI Ethernet address to the initiator.

The Add Target Portal window appears

NOTE:

This example uses the GbE address (33.33.33.170).

Figure 5 Add Target Portal window

Enter the appropriate information in the following boxes:

• IP address or DNS name

(Figure

5).

(Figure

3) on the server

C-Series iSCSI