Cisco 9124 - mds multilayer fabric switch Configuratiehandleiding - Pagina 25

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco 9124 - mds multilayer fabric switch. Cisco 9124 - mds multilayer fabric switch 49 pagina's. Mds 9000 series
Ook voor Cisco 9124 - mds multilayer fabric switch: Specificaties (2 pagina's), Gegevensblad (9 pagina's), Specificaties (3 pagina's), Release Release (48 pagina's), Release Release (44 pagina's), Release Release (36 pagina's), Release Release (22 pagina's), Release Release (3 pagina's), Release Release (40 pagina's), Handmatig (16 pagina's), Hardware installatiehandleiding (36 pagina's)

Presenting EVA LUNs to the iSCSI initiator

After the iSCSI Initiator connects to the EVA controller, the EVA recognizes the iSCSI Initiator WWPN that

was mapped from the C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module

(14/2),, or MDS 9216i switch as if it were a Fibre Channel HBA. The EVA can use the iSCSI Initiator

WWPN to create a host entry and present LUNs to the host entry.

NOTE:

This section describes conﬁguring LUNs on an EVA. For conﬁguring LUNs on other storage products,

refer to the procedures described in the product documentation.

The EVA is managed and conﬁgured with Command View EVA.

To create an EVA host entry:

Select the Storage Array icon and click the Hosts folder

Figure 14 Host Folder—Add host

Click Add host.

The Add a Host window appears

(Figure

15).

14).

C-Series iSCSI