Cisco 9134 - MDS Multilayer Fabric Switch Configuratiehandleiding - Pagina 17

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco 9134 - MDS Multilayer Fabric Switch. Cisco 9134 - MDS Multilayer Fabric Switch 49 pagina's. Mds 9000 series
Ook voor Cisco 9134 - MDS Multilayer Fabric Switch: Specificaties (3 pagina's), Release Release (48 pagina's), Release Release (44 pagina's), Release Release (22 pagina's), Release Release (3 pagina's), Release Release (40 pagina's), Release-opmerkingen (10 pagina's), Handmatig (16 pagina's), Hardware installatiehandleiding (36 pagina's)

During setup, the install procedure places a Microsoft iSCSI Initiator icon

desktop as well as in the control panel. The Microsoft iSCSI Initiator also has a CLI. Refer to the user

guide for more information.

Figure 3 Microsoft iSCSI Initiator icon

To install the Microsoft iSCSI Initiator:

Double-click the Microsoft iSCSI Initiator icon to open the iSCSI Initiator Properties window

(Figure

4).

Figure 4 iSCSI Initiator Properties window

Click Add to add the IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module

(14/2),, or MDS 9216i switch iSCSI Ethernet address to the initiator.

The Add Target Portal window appears

NOTE:

This example uses the GbE address (33.33.33.170).

Figure 5 Add Target Portal window

Enter the appropriate information in the following boxes:

• IP address or DNS name

(Figure

5).

(Figure

3) on the server

C-Series iSCSI