DigiPower TC-2000 Instructies - Pagina 2

Blader online of download pdf Instructies voor {categorie_naam} DigiPower TC-2000. DigiPower TC-2000 2 pagina's. Dual travel charger

Operating instructions:

1. While the battery is on the cradle, connect the base charger to a power source.

The Charging Meter will light up.

The meter will begin to blink at the start of each charging level.

Less than 25% capacity, the 1

Less than 50% capacity, the 2

Less than 75% capacity, the 3

Less than 100% capacity, the 4

When the battery is fully charged, the charging meter will be fully lit and will stop blinking.

(The typical charge time is 1-hour for batteries up to 900mAh.)

NOTE:

The charger or battery may become warm when charging. This is a normal occurrence.

CAUTIONS:

Always unplug the charger while not in use.



Do not store, place or use the charger where it may come into contact with water or moisture.



Always replace frayed or damaged wire and broken plugs immediately.



To reduce the risk of electric shock, unplug your charger from the wall outlet before cleaning.



Do not open or disassemble the charger unit.



Maintenance:

Use a clean, DRY cloth when necessary to keep the metal contacts of both the charger and the battery clean.

(Remove from power outlet before cleaning.)

LIMITED WARRANTY:

This product carries a full one-year warranty from date of purchase against defects in materials and workmanship.

This warranty does not cover damage resulting from accidents, misuse, unauthorized repair/alternations to the

product or failure to follow operating instructions.

Visit our web site:

www.digipowersolutions.com

Email:

LED will blink.

Base

Charger

Charging

Meter

Battery

Plate

Battery