Cisco AJ732A - MDS 9134 Fabric Switch Configuratiehandleiding - Pagina 19

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco AJ732A - MDS 9134 Fabric Switch. Cisco AJ732A - MDS 9134 Fabric Switch 49 pagina's. Converged network switches for nx-os 4.0(1a)n1(1)
Ook voor Cisco AJ732A - MDS 9134 Fabric Switch: Release Release (48 pagina's), Release Release (44 pagina's), Release Release (44 pagina's), Release Release (36 pagina's), Release Release (26 pagina's), Release Release (22 pagina's), Snelle referentiehandleiding (14 pagina's), Release Release (3 pagina's)

•

With the CLI:

Enter the show iSCSI initiator command.

Example:

MDS9216i# show iscsi initiator

iSCSI Node name is iqn.1991-05.com.microsoft:w2k3x03.sanbox.com

Initiator ip addr (s):

iSCSI alias name:

Node WWN is 21:0f:00:0d:ec:0d:2c:42 (dynamic)

Member of vsans:

Number of Virtual n_ports:

Virtual Port WWN is 21:0e:00:0d:ec:0d:2c:42 (dynamic)

Interface iSCSI 1/1, Portal group tag:

VSAN ID 1, FCID 0x7e0015

IMPORTANT:

By default, transparent mode mapping is set to

mode mapping must be set to

the HP Fibre Channel controller to the iSCSI Initiator.

Conﬁguring transparent mode static mapping

The C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module (14/2), and

MDS 9216i switch have two modes of mapping IP addresses:

•

Transparent mode dynamic mapping

•

Transparent mode static mapping

You must enable static mapping for each iSCSI Initiator to guarantee persistent LUN mapping from the HP

Fibre Channel storage controller. There are two ways to enable static mapping:

•

With the Device Manager GUI:

Select IP > iSCSI from the Device Manager tool bar.

The IP iSCSI window appears

Figure 8 IP iSCSI window—Setting transparent mode static mapping

Clear the Dynamic check box.

Select the Persistent check box.

Select the System Assigned check box.

Click Apply.

Close the IP iSCSI window.

33.33.33.143

Dynamic

Static

for each iSCSI Initiator to guarantee persistent LUN mapping from

(Figure

8).

0x0

when the initiator entry is created. Transparent

C-Series iSCSI