Cisco AJ732A - MDS 9134 Fabric Switch Release Release - Pagina 22

Blader online of download pdf Release Release voor {categorie_naam} Cisco AJ732A - MDS 9134 Fabric Switch. Cisco AJ732A - MDS 9134 Fabric Switch 44 pagina's. Converged network switches for nx-os 4.0(1a)n1(1)
Ook voor Cisco AJ732A - MDS 9134 Fabric Switch: Configuratiehandleiding (49 pagina's), Release Release (48 pagina's), Release Release (44 pagina's), Release Release (36 pagina's), Release Release (26 pagina's), Release Release (22 pagina's), Snelle referentiehandleiding (14 pagina's), Release Release (3 pagina's)

Pagina afdrukken
Cisco AJ732A - MDS 9134 Fabric Switch Release Release
Downgrading Your Cisco MDS SAN-OS Software Image
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Use
Table 8
the SAN-OS image you want to downgrade to in the To SAN-OS Release column of the table and use
the path recommended.
The software downgrade information in
Note
Downgrading system software disrupts IP and SSM intelligent services traffic.
Table 8
To SAN-OS Release Nondisruptive Downgrade Path
SAN-OS 3.1(4)
SAN-OS 3.1(3a)
SAN-OS 3.1(2b)
SAN-OS 3.1(2a)
SAN-OS 3.1(2)
SAN-OS 3.1(1)
SAN-OS 3.0(3a)
SAN-OS 3.0(3)
SAN-OS 3.0(2a)
SAN-OS 3.0(2)
SAN-OS 3.0(1)
SAN-OS 2.1(3)
SAN-OS 2.1(2e)
SAN-OS 2.1(2d)
SAN-OS 2.1(2b)
SAN-OS 2.1(2)
SAN-OS 2.1(1b)
SAN-OS 2.1(1a)
SAN-OS 2.0(4a)
SAN-OS 2.0(4)
SAN-OS 2.0(3)
SAN-OS 2.0(2b)
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(1)
22
IVR: With IVR enabled, you must follow additional steps if you are downgrading from Cisco
–
SAN-OS Release 2.1.(1a), 2.1(1b), or 2.1.(2a). See the
on page 16
for these instructions.
–
FICON: If you have FICON enabled, the downgrade path is different. See
–
iSNS: The iSNS feature does not support a graceful downgrade from Cisco MDS SAN-OS
Release 3.2(1) to any earlier SAN-OS release. Prior to a downgrade from Cisco SAN-OS 3.2(1),
disable the MDS iSNS server and remove all configurations associated with the MDS iSNS
client.
to determine your nondisruptive downgrade path from Cisco SAN-OS Release 3.2(1). Find
Nondisruptive Downgrade Path from SAN-OS Release 3.2(1)
You can nondisruptively downgrade directly from SAN-OS Release 3.2(1).
You can nondisruptively downgrade directly from SAN-OS Release 3.2(1).
You can nondisruptively downgrade directly from SAN-OS Release 3.2(1).
You can nondisruptively downgrade directly from SAN-OS Release 3.2(1).
You can nondisruptively downgrade directly from SAN-OS Release 3.2(1).
You can nondisruptively downgrade directly from SAN-OS Release 3.2(1).
You can nondisruptively downgrade directly from SAN-OS Release 3.2(1).
You can nondisruptively downgrade directly from SAN-OS Release 3.2(1).
You can nondisruptively downgrade directly from SAN-OS Release 3.2(1).
You can nondisruptively downgrade directly from SAN-OS Release 3.2(1).
You can nondisruptively downgrade directly from SAN-OS Release 3.2(1).
You can nondisruptively downgrade directly from SAN-OS Release 3.2(1).
You can nondisruptively downgrade directly from SAN-OS Release 3.2(1).
You can nondisruptively downgrade directly from SAN-OS Release 3.2(1).
You can nondisruptively downgrade directly from SAN-OS Release 3.1(2b).
Downgrade to SAN-OS Release 2.1(2b) and then downgrade to Release 2.1(2).
Downgrade to SAN-OS Release 2.1(2b) and then downgrade to Release 2.1(1b).
Downgrade to SAN-OS Release 2.1(2b) and then downgrade to Release 2.1(1a).
Downgrade to SAN-OS Release 2.1(2b) and then downgrade to Release 2.0(4a).
Downgrade to SAN-OS Release 2.1(2b) and then downgrade to Release 2.0(4).
Downgrade to SAN-OS Release 2.1(2b) and then downgrade to Release 2.0(3).
Downgrade to SAN-OS Release 2.1(2b) and then downgrade to Release 2.0(2b).
"Upgrading with IVR Enabled" section
Table 8
applies only to Fibre Channel switching traffic.
Table
9.
OL-14116-01