Cisco AJ732A - MDS 9134 Fabric Switch Release Release - Pagina 9

Blader online of download pdf Release Release voor {categorie_naam} Cisco AJ732A - MDS 9134 Fabric Switch. Cisco AJ732A - MDS 9134 Fabric Switch 36 pagina's. Converged network switches for nx-os 4.0(1a)n1(1)
Ook voor Cisco AJ732A - MDS 9134 Fabric Switch: Configuratiehandleiding (49 pagina's), Release Release (48 pagina's), Release Release (44 pagina's), Release Release (44 pagina's), Release Release (26 pagina's), Release Release (22 pagina's), Snelle referentiehandleiding (14 pagina's), Release Release (3 pagina's)

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .

Migrating from Supervisor-1 Modules to Supervisor-2 Modules

As of Cisco MDS SAN-OS Release 3.0(1), the Cisco MDS 9509 and 9506 Directors support both

Supervisor-1 and Supervisor-2 modules. Supervisor-1 and Supervisor-2 modules cannot be installed in

the same switch, except during migration. Both the active and standby supervisor modules must be of

the same type, either Supervisor-1 or Supervisor-2 modules. For Cisco MDS 9513 Directors, both

supervisor modules must be Supervisor-2 modules.

Migrating your supervisor modules is a disruptive operation.

Caution

Migrating from Supervisor-2 modules to Supervisor-1 modules is not supported.

Note

To migrate from a Supervisor-1 module to a Supervisor-2 module, refer to the step-by-step instructions

in the

Configuring Generation 2 Switching Modules

The Cisco MDS 9500 Multilayer Directors are designed to operate with any combination of Cisco MDS

9000 Generation 1 and Generation 2 modules. However, there are limitations to consider when

combining the various modules and supervisors in the Cisco MDS 9500 Series platform chassis. The

references listed in this section provide specific information about configurations that combine different

modules and supervisors.

For information on configuring Generation 2 switching modules, refer to:

http://www.cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a0080664c6b.html

For information on port index availability, refer to:

http://www.cisco.com/en/US/products/ps5990/products_installation_guide_chapter09186a0080419599.html

For information on Cisco MDS 9000 hardware and software compatibility, refer to:

http://www.cisco.com/en/US/products/ps5989/products_device_support_table09186a00805037ee.html

Upgrading Your Cisco MDS SAN-OS Software Image

This section lists the guidelines recommended for upgrading your Cisco MDS SAN-OS software image

and contains the following sections:

•

OL-12208-05

Cisco MDS 9000 Family CLI Configuration

Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.1(3)

Upgrading Your Cisco MDS SAN-OS Software Image

Guide.