Cisco BTS 10200 Softswitch Gebruikershandleiding - Pagina 16

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco BTS 10200 Softswitch. Cisco BTS 10200 Softswitch 29 pagina's. T.38 fax relay

Pagina afdrukken

Media Gateway Profile

The Media Gateway Profile (mgw-profile) table provides templates for defining a Media Gateway by

hardware vendor. It identifies the specifications and settings necessary for communications between the

Call Agent and each type of Media Gateway. An ID must be created in this table before entries can be

added to the Media Gateway table.

Several tokens have values that can be overwritten after the Call Agent queries the Media Gateway for

supported capabilities. If the Media Gateway returns a value different from the value originally

provisioned, the returned value automatically replaces the originally provisioned value.

Table Name: MGW-PROFILE

Table Containment Area: Call Agent

Command Types

Show, add, change, and delete

Examples

•

Usage Guidelines

Primary Key Token(s): id

Add Rules:

•

Change Rules: none

Delete Rules: id does not exist in any mgw::mgw-profile-id.

Token Properties

Table 3 lists the token properties that were added to this command for T.38 Fax Relay.

Table 5

Token

FAX-T38-CAMODE-SUPP

CA-controlled T.38 fax relay in

real time (CA instructs GW

when to switch to T.38 mode).

FAX-INBAND-SUPP

Specifies whether inband mode

of fax relay is supported.

FAX-PREF-MODE

Designates preferred mode of

T.38 fax relay for this gateway.

Cisco BTS 10200 Softswitch T.38 Fax Relay Support

show h323-mgw-profile id=resgw2000;

add h323-mgw-profile id= resgw2000; fax-inband-supp=N; fax-pref-mode=fax-t38-camode

change h323-mgw-profile id= resgw2000; fax-inband-supp=N;

delete h323-wgw-profile id= resgw2000;

If fax-pref-mode=FAX-T38-CAMODE, then fax-t38-camode-supp=Y;

If fax-pref-mode=FAX-INBAND, then fax-inband-supp=Y;

T.38 Fax Relay Tokens

Values

Y/N (Default = Y)

FAX-T38-CAMODE—This is the default value.

FAX-INBAND—Possible only for G.711 and G.726,

supported by MGX 8260.

Cisco BTS 10200 Softswitch T.38 Fax Relay