Cisco Business CBS250-48T-4G Snelstarthandleidingen - Pagina 5
Blader online of download pdf Snelstarthandleidingen voor {categorie_naam} Cisco Business CBS250-48T-4G. Cisco Business CBS250-48T-4G 5 pagina's. Smart switches
Pagina afdrukken
Get Connected
Preparing Your Product
Plug the power cord of the switch into an outlet. Connect your computer to the switch using an ethernet cable.
Ensure that your computer is on and proceed to "Get Configured".
LED Functions
GREEN
LED
STEADY
Booting, performing self tests or
System
Switch has acquired an IP
acquiring IP address or factory
address through DHCP or a
default IP address is being used.
static IP address has been
manually configured.
Port is passing traffic.
LINK/ACT
Link between corresponding
port and another device
detected.
PoE*
Gigabit*
1000 Mbps link is
estabslished.
* Depending on model. PoE switches will only have a PoE LED whereas non PoE switches will have a Gigbit LED.
Cisco Business 250 Series Smart Switches | Quick Start Guide
GREEN
AMBER
FLASHING
Flashing
Hardware failure detected.
Steady
Power is being supplied
to a device connected to
the port.
Get Configured
To connect the managed switch:
1
The switch will attempt to acquire an IP address
if there is a DHCP server in the network. If the
switch cannot acquire an IP address through DHCP,
it uses the factory default IP address of
192.168.1.254, with a subnet of /24.
a. If the switch is using the factory default
IP address of 192.168.1.254/24, you must choose
an IP address for the computer in the range of
192.168.1.2-192.168.1.253 that is not already in use.
Access the managed switch:
1
Open a web browser window.
2
Enter the switch IP address in the address bar and
press Enter. For example, http://192.168.1.254.
The
Switch Login Page
3
Enter the default login information:
Username is
cisco
●
Default password is
●
(passwords are case-sensitive)
4
Click
Log
In.
If this is the first time that you have logged on
with the default username and password, the
Change Password page opens. The rules for
constructing a new password are displayed
on the page.
Command Line Interface (CLI)
OFF
You can also access the switch by using the switch's command-line interface, refer to the
Administration Guide
for more information.
Switch is powered off.
Mounting
For mounting and stacking instructions, please see the
Link down.
Support
Power is not being supplied
or nothing is connected to
For Cisco support and additional documentation, including mounting instructions and the
the port.
administration guide, visit
Connection speed is under
1000 Mbps or nothing is
connected to the port.
©2020 Cisco and/or its affiliates. All rights reserved. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries.
To view a list of Cisco trademarks, go to this URL: https:// www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
b. If the IP address is assigned by a DHCP server,
make sure the DHCP server is running and can
be reached from the switch and the computer.
It might be necessary to disconnect and
reconnect the devices for them to discover their
new IP addresses from the DHCP server.
NOTE:
Details on how to change the IP address
on your computer depend upon the type of
architecture and operating system you are using.
Use the computer Help and Support functionality
to search for "IP Addressing."
5
Enter a new password and confirm the password.
NOTE:
Password complexity is enabled by default.
The password must comply with the default
complexity rules.
displays.
6
Click Apply.
Make sure that any configuration changes made
cisco
are saved before exiting from the web-based
interface by clicking on the
rebooting or losing power before you save your
configuration will result in all changes being lost.
The Getting Started window displays. You are now ready
to configure the switch. Refer to your Administration
Guide for further information.
Cisco Business 250 Series Administration
cisco.com/go/250switches
Save
icon. Exiting,
Cisco Business 250 Series
Guide.