Accustic Arts Power ES Handmatig - Pagina 10

Blader online of download pdf Handmatig voor {categorie_naam} Accustic Arts Power ES. Accustic Arts Power ES 13 pagina's.

IMPORTANT!

Instruction for the use of banana plugs:

Use only banana plugs with a corresponding CE conformity declaration. For

questions regarding certain plug types please get in contact with your authorized

dealer.

5.6 Correct phase for the loudspeakers

The terminals on your amplifier and your loudspeaker are color coded or marked with a plus (+) and

minus (-). Connect the red (+) output terminal of your amplifier with the red (+) input terminal of your

loudspeaker. Proceed in the same way with the white or black (-) terminals.

IMPORTANT!

Avoid short circuits!

Never connect the output terminals of your power amplifier to each other. Neither

connect red (+) with white or black (-) of the channel nor the channels to each

other.

IMPORTANT!

Please observe at all times!

Before you connect the amplifier with some other units using a cable, please

never forget that both units must first be switched off.

5.7 Replacing damaged mains fuses

If a fuse is damaged only replace the fuse with original types having the same ampere value, the

same voltage endurance and the same time-lag. Never use fuses with other ampere classes or time-

lag classes.

IMPORTANT!

Pull out the mains plug!

Always disconnect the unit from the mains power before replacing a fuse.

To change the fuse 2 please use a screwdriver suitable for the slot in the fuse holder. Press the

screwdriver lightly into the slot and gently lever the fuse holder (plastic cap) carefully out of the

respective socket. Now you can take out the fuse holder and replace the fuse.

For countries with 220- 240 V / 50- 60 Hz

please use the following fuse types:

3.15 Ampere – time lag

Notice:

Use the included fuse for replacement! Use only original parts!

For countries with 100-120 V / 50- 60 Hz

please use the following fuse types:

6.3 Ampere – time lag