Accustic Arts CD-PLAYER I (MK 3) Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Accustic Arts CD-PLAYER I (MK 3). Accustic Arts CD-PLAYER I (MK 3) 10 pagina's.
Ook voor Accustic Arts CD-PLAYER I (MK 3): Gebruiksaanwijzing (14 pagina's)

Pagina afdrukken

Fig. 2: Front view

Rotary switch to select input of reproduction device

>IN 1 – IN 2 – IN 3 – IN 4 – IN 5<

9.1

Push-button for activating input >SURROUND BYPASS<

9.2

LED lights up when switch >SURROUND< is pressed

Infrared remote control receiver for volume control >REMOTE<

LED (blue) indicates unit is ready for operation >ON<

Push-button for deactivating the output relays >MUTE<

Rotary potentiometer for volume setting >VOLUME<

5.1 Application possibilities for the PREAMP I – MK 3

The PREAMP I – MK 3 is a premium audiophile preamplifier without compromise, fulfilling the highest

demands of audiophile listeners. For this premium preamplifier only the best and most expensive parts

of the world's most renowned manufacturers are used.

The PREAMP I – MK 3 is designed to work with a power amplifier, e.g. AMP I, AMP II or AMP III from

ACCUSTIC ARTS

. Of course you can use this ACCUSTIC ARTS

quality brands.

5.2 Use and start-up of an analog input >IN 1 to IN 5<

The PREAMP I – MK 3 has three fully balanced (analog) high level inputs >IN 1 – IN 2 – IN 3< and

two unbalanced (analog) high level input >IN 4 – IN 5<. This means in total you can connect 5 various

reproduction devices via their analog outputs.

>SURROUND BYPASS< is a special configured analog input and will be described in chapter 5.3.

If you want to connect a digital-analog converter, e.g. the DAC I from ACCUSTIC ARTS

use digital devices via the converter, then simply connect the analog output of your digital-analog

converter with one analog input of this preamplifier.

If you have an analog record player (turntable, phono), then do not connect it directly to one of the

inputs. To connect the record player you need a phono-preamplifier which you must wire between the

record player and the PREAMP I – MK 3.

unit with units from other premium

, in order to