Cisco Catalyst 1800 Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} Cisco Catalyst 1800. Cisco Catalyst 1800 8 pagina's. Token ring switch cable kit

Connecting to a VT-Series Terminal

•

The Catalyst 1800 console cable kit (part number 78-1188-01) includes

•

Connecting to a VT-Series Terminal

Follow these steps to connect a VT 320/420-series terminal to a Catalyst 1800 Token Ring switch

(see Figure 1):

Step 1

Step 2

Step 3

Step 4

Step 5

Transmit

Bits per character (BPC)

Parity

Stop bit

Flow control

After these parameters are set, you can access out-of-band management. Refer to the Catalyst 1800

Token Ring Switch User Guide for instructions on using the console interface.

2 Catalyst 1800 Token Ring Switch Cable Kit Guide

DB-25 VT-series connector

DB-25 modem connector

One 6-foot (1.8-meter) length of unshielded twisted pair (UTP) EIA/TIA-232 cable with RJ-45

connectors at each end

One RJ-45 to DB-9 female adapter (for console port connection)

One RJ-45 to DB-9 female adapter (for PC connection)

One RJ-45 to DB-25 female adapter (for VT terminal connection)

One RJ-45 to DB-25 male adapter (for modem connection)

Plug either end of the EIA/TIA-232 cable into the RJ-45-to-DB-9 female adapter labelled

"Console port."

Connect the console port female adapter to the male DB-9 console port on the front of the

Catalyst 1800 chassis.

Plug the RJ-45 connector at the other end of the EIA/TIA-232 cable into the

RJ-45-to-DB-25 female adapter labelled "VT series."

Connect the VT-series DB-25 female adapter to the DB-25 male adapter on the cable

extending from the VT terminal's COMM port.

Turn on the terminal and access the setup directory. Set the following parameters on your

terminal:

9600

None

Off