Cisco Catalyst 2960 Series Aan de slag handleiding - Pagina 19

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco Catalyst 2960 Series. Cisco Catalyst 2960 Series 25 pagina's. Compact switches
Ook voor Cisco Catalyst 2960 Series: Gegevensblad (16 pagina's), Gegevensblad (11 pagina's), Gegevensblad (9 pagina's), Product Bulletin (3 pagina's), Product Bulletin (5 pagina's), Gegevensblad (21 pagina's), Specificaties (2 pagina's), Brochure & specificaties (10 pagina's), Gegevensblad (15 pagina's), Gegevensblad (28 pagina's), Brochure (17 pagina's), Installatiehandleiding (27 pagina's)

Chapter 1

Getting Started Guide

Install the SFP Modules and Connect to the Ports

Step 1

Grasp the module on the sides, and insert it

into the switch slot until you feel the

connector snap into place.

Step 2

Insert an appropriate cable into the module

port. Insert the other cable end into the other

device.

Caution

OL-9368-03

either a crossover or a straight-through cable for connections to a copper 10/100

or 10/100/1000 module port on the switch, regardless of the type of device on the

other end of the connection

Follow these steps:

For a list of supported modules, see the release notes on Cisco.com. For detailed

instructions on installing, removing, and connecting to SFP modules, see the

documentation that came with the SFP module.

Removing and installing an SFP module can shorten its useful life. Do not remove

and insert SFP modules more often than is absolutely necessary.

11X

12X

SFP module

SFP module port

Catalyst 2960 Switch Getting Started Guide

Rack-Mounting

C a t a ly s

t 2 9 6 0

S E R IE

C a t a ly s

t 2 9 6 0

S E R IE

11X

12X

1-17