Digisat TM-610 Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Digisat TM-610. Digisat TM-610 7 pagina's. Dvb-t/t2 handheld meter
Pagina afdrukkenTechnical specification
Receiving Frequency: 48.25 ~ 863.25 MHz.
RF input impedance : 75Ω.
Connector : Removable F-adaptor.
Margin of power : 35 dBµV to 100 dBµV.
DVB-T (COFDM) : Power, CBER, VBER, SNR.
DVB-T2 (COFDM) : Power, CBER, LBER, SNR.
Upgrade mode : Software upgrade by USB port.
Power-supply : 100-240V/50/60Hz 12V, 1000mA.
Recharging time : Around 3 hours.
Signal Parameters
Identification
Carriers
Guard Interval
Code Rate
Modulation
Bandwidth
PLP Mode
PLP ID
Accessories
Power adapter, 1 RF connector, 1 CD for user manual.
Trouble shooting
1. Unable to power on: Charge the meter about 3hours until the charge light turn blue.
2. Warning LED flashing: Antenna overload, power off the meter and check the signal cable. After that please
power on again.
3. Hung up: Press the reset button to reset the meter.
4. Can't lock signal: Please confirm the signal cable is connected correctly and make sure the antenna power is
been set to ON if the antenna needs power supply.
5. Other questions: please contact your dealer.
TM-610 User`s Manual
DVB-T
2k, 4k, 8k
1/4, 1/8, 1/16, 1/32
1/2, 2/3, 3/4, 5/6, 7/8
QPSK,16-QAM,64-QAM
6, 7 and 8 MHz
-----
-----
7/7
DVB-T2
1k, 2k, 4k, 8k, 8k+E, 16k, 16k+EXT,
32k,32k+EXT
1/4, 19/256, 1/8, 19/128, 1/16, 1/32, 1/128
1/2, 3/5, 2/3, 3/4, 4/5, 5/6
QPSK, 16QAM, 64QAM, 256QAM
6,7 and 8 MHz
Single / Multiple
0-255