Digiscan Labs iStranger Gebruikershandleiding
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Digiscan Labs iStranger. Digiscan Labs iStranger 2 pagina's.
Pagina afdrukken
"iStranger" Voice Changer
The iStranger is a unique voice changing system designed to be compatible with most existing cell phones. Gone are the
days of landline telephones. In the modern era of smartphones comes a new era of voice changer. Simply insert the voice
changer's headphone jack into your cellphone, hold the iStranger to your ear like a phone receiver (see picture) and
speak normally. The two voice changing modes, LOW and HIGH allow for greater disguise of different voice pitches so
the user can go unrecognized by the call receiver. The single wire design makes the iStranger easy to connect so that
setup is simplistic and straight forward. The iStranger's rechargable battery offers 6 hours of battery life, totalling nearly a
full 8 hour shift of voice changing power. The system only turns on while the phone is in use, preserving the user's battery
life for when they need it most. Designed for portability, the durable metal housing and rubber edge will withstand normal
wear and tear better than most products. Simple and powerful, this is a true voice changing companion.
Features
Changes your voice in the two working modes – with a "low" and a "high" tone
•
Works with all modern smart phones which have a 4-contact, 3.5 mm connector (such as Apple, Samsung, HTC
•
and others)
Built-in rechargeable battery with 6 hour reserve
•
Functions as a headset, i.e. conversations are conducted via the device
•
Recharged by USB (cable supplied)
•
Automatically goes into sleep mode when inactive
•
Compatibility
TheiStranger was designed to function with
smartphones,
such
as
Samsung, HTC and other manufacturers. To be
compatible, the phone must have a 3.5mm
phone jack that supports a 4-contact male
connector (reference picture below). If you are
unsure about which type your phone accepts,
please consult its user manual or specification
sheet. Alternatively, if the phone came with a
microphone or headset, please count the
number of divided sections. If that connector has
3 sections the voice changer will not be compatible with your phone. If that connector has 4 sections the voice changer
will work with your phone. You may reference the picture below containing a 3 and 4 section male phone jack to
determine the necessary connection type compatible with the iStranger.
Charging the Device
The voice changer has an internal rechargeable battery to power itself. When the device is in use and the battery is low,
the red indicator light at the top of the device will be lit. Please note that the device will not indicate a low battery while not
in operation and it is in 'sleep' mode (see number 4 in the 'Important Notes' section below).
To charge it, use the included USB cable by inserting the Micro USB end into the top of the voice changer and placing the
other end into a USB charging source, such as a USB wall charger or powered hub.
When charging, the yellow indicator light will remain lit until the battery is full, at which point it will turn off. A complete
charge of the battery takes approximately 2 hours and provides approximately 6 hours or more of operational use.
those
from
Apple,
User's Manual