DigiSender Plug'n'Go DX2000-LCD Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DigiSender Plug'n'Go DX2000-LCD. DigiSender Plug'n'Go DX2000-LCD 16 pagina's. 5.8ghz single input ‘plug style’ wireless av sender
cont...
I see a snowstorm effect or
Switch OFF your DigiSender® RECEIVER.
Q: What do you now see at the second TV?
I now see a Black screen
NOT RECEIVING
SIGNAL
1. Switch the DigiSender® Re-
ceiver back on.
2. Ensure the DigiSender® Trans-
mitter is switched on.
3. Try the other 3 available
Audio/Video channels ensuring
that the Audio/Video Channel is
set the same on both the Trans-
mitter and Receiver.
Please read this instruction manual carefully prior to installation
plain blue screen
I still see a snowstorm or
blue picture
WRONG TV
CHANNEL SELECTED
This indicates that the correct
SCART Channel has NOT been
selected on the second televi-
sion. Look for buttons on this tel-
evisions remote control which
could select the AV Channel such
as EXT, AV, VIDEO, VCR, AUX,
Channel 0 AND
DX2000-LCD - DigiSender® Plug'n'Go™ LCD
I see lines over the picture
INTERFERENCE
This indicates one or more elec-
trical devices are interfering with
the DigiSender®. Make sure the
Transmitter and Receiver are not
directly on top of other electrical
devices. Try all 4 Audio/Video
Channels on your DigiSender® as
one or more may still be avail-
able. Visit digisender.net or con-
tact our helpline for information
on configuring your equipment to
work together.
.
Page 11