DigiSender Plug'n'Go LCD Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DigiSender Plug'n'Go LCD. DigiSender Plug'n'Go LCD 16 pagina's. 5.8ghz single input ‘plug style’ wireless av sender

Pagina afdrukken

Troubleshooting

Problems Controlling the Source Equipment

If you have any difficulty operating your source equipment remote control in your second room

please follow the advice below below:

1. Ensure you are using the correct remote control in the second room. For instance, if you are

trying to control your Satellite Receiver you will need to use the Satellite remote control.

2. Ensure the IR Emitter is facing the IR Sensor on your source equipment.

3. Move the IR Emitter further away from the source equipment.

4. Move the DigiSender® Plug'n'Go™ LCD Transmitter AND Receiver further away from other

electrical devices.

5. Try operating your source remote control closer to the IR Sensor.

6. Replace the batteries in your source remote control.

Please read this instruction manual carefully prior to installation

WATCH A VIDEO

INSTALLATION

& TROUBLESHOOTING GUIDE

Available online at: www.aei.eu/video

DX2000-LCD - DigiSender® Plug'n'Go™ LCD

Page 13