DigiSender Plug'n'Go LCD Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DigiSender Plug'n'Go LCD. DigiSender Plug'n'Go LCD 16 pagina's. 5.8ghz single input ‘plug style’ wireless av sender

Pagina afdrukken

Step 2: Install the Transmitter

The DX2000-LCD Transmitter will send the audio and video from a connected source (your Satellite

receiver for example) to the DX2000-LCD Receiver, located in another room in your home.

Connect the DigiConnector™ to your Satellite,

Cable or Freeview box. Use the SCART socket la-

belled 'TV' or 'OUT'. Connect any existing SCART

lead into the rear of the DigiConnector™.

Press and hold the power button for 5 seconds to

turn the Transmitter on. Pressing the button again

cycles through the 4 available channels. Make sure

it is set to channel 1.

Please read this instruction manual carefully prior to installation

DX2000-LCD - DigiSender® Plug'n'Go™ LCD

Connect the Transmitter into a Mains Extension

Lead. The positioning of the Transmitter can affect

the picture quality so being able to move it is an

advantage.

Position the IR Emitter in front of your Satellite,

Cable or Freeview box with the lens facing the

equipment's IR sensor.

Page 05