Cisco Catalyst 2960-S Series Installatiehandleiding - Pagina 7
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco Catalyst 2960-S Series. Cisco Catalyst 2960-S Series 27 pagina's. Switch getting
Ook voor Cisco Catalyst 2960-S Series: Gegevensblad (28 pagina's), Handleiding starten (31 pagina's)
Pagina afdrukken
Chapter 1
Switch Installation
Installing the FlexStack Module
Use a flat-blade screwdriver to remove the FlexStack module blank cover on the switch back panel.
Step 1
Figure 1-1
Step 2
Grasp the FlexStack module on the sides, and insert it into the module slot. Push the module in
completely until you feel it snap into place.
Figure 1-2
Secure the screws tightly on each side of the module.
Step 3
Figure 1-3
Note
OL-19732-04
Removing the Blank Cover
Inserting the FlexStack Module
Securing the FlexStack Module
Make sure the screws are only finger-tight to avoid overtightening.
RA TIN G
10 0-2 40 ~
12 -6A , 50
-60 Hz
RA TIN G
10 0-2 40 ~
12 -6A , 50
-60 Hz
Catalyst 2960-S Switch Hardware Installation Guide
Planning a Switch Stack
1-7